Accupro 4-Flute High Performance AlTiN Coated Fine Tooth Roughing End Mill, 5/16″ Size, 7/16″ LOC, 2″ OAL
Solid Micrograin Carbide
30 Helix
- For steels, stainless steels, titanium high temperature alloys.
- Reduces vibration and chatter
Surface Treatments:
AlTiN (Aluminum Titanium Nitride)
- Recommended for difficult to machine materials
- Used for aggressive machining of aircraft/aerospace materials, stainless steels, high alloy carbon steels, nickel based high-temperature alloys and titanium alloys. Also used in dry machining of cast irons, nodular iron and selected carbon steel.
- Extremely hard, wear resistant
- Provides increase of 75 to 100% in machining speeds vs uncoated tools
Specifications:
| Mill Diameter (Inch) |
5/16 |
| Mill Diameter (Decimal Inch) |
0.3125 |
| Number of Flutes |
4 |
| Pitch |
Fine |
| Length of Cut (Inch) |
7/16 |
| Length of Cut (Decimal Inch) |
0.4375 |
| Shank Diameter (Inch) |
5/16 |
| End Type |
Square End |
| Material |
Solid Carbide |
| Finish/Coating |
AlTiN |
| Overall Length (Inch) |
2 |
| Centercutting |
Center Cutting |
| Extended Reach |
No |
| Material Grade |
Micrograin |
| Single or Double End |
Single |
| Cutting Direction |
Right Hand |
| Flute Direction |
Right Hand |
| Length Type |
Stub |
| Helix Angle |
30.00 |
| Mill Diameter Tolerance (Decimal Inch) |
+0.000/-0.005 |
| Shank Diameter Tolerance (Decimal Inch) |
+0.0001/-0.0004 |
See all Accupro 4-Flute High Performance TiCN AlTiN Coated Fine Tooth Roughing End Mills
Reviews
There are no reviews yet.