Mitutoyo Bore Gage for Blind Holes, 1.4 – 2.4″ – 511-419
Series 511
New model measures blind-hole diameter with high accuracy and high durability
Features:
- Capable of ID (inside diameter) measurement close to the bottom of a hole
- Pendulum guide structure improves sliding
- Carbide contact faces for durability
- Grip is large and hollow to reduce effect of body heat on high-accuracy measurements
- Extension rods (optional) can be attached for measuring deep holes
- A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting the gage before making a measurement.
- Alternate indicators may be used in place of those recommended*
* Some indicators and protection covers cannot be used with these bore gages. Contact us if considering the use of Dial or Digimatic indicators other than the recommended models.
Specifications:
| Order No. |
511-419 |
511-429 |
511-439 |
| Measuring range |
1.4 – 2.4″ |
| Indicator included |
– |
2922SB |
2923SB-10 |
| Accuracy |
Wide-range accuracy |
0.00016″ |
| Repeatability |
0.00004″ |
| Adjacent error |
0.00004″ |
| Effective stroke of contact rod |
0.047″ |
| No. of anvils |
6 |
| No. of replacement washers |
4 |
Notes:
1. A 10mm (.4″) sub-anvil is supplied with 511-415/425/435/418/428/438 and a 50mm (2″) sub-anvil is supplied with 511-417/ 427/437/420/430/440.
2. It is not permissible to use a sub-anvil other than the standard accessory, or widen a measuring range by using multiple sub-anvils.
(The measurement accuracy in such cases is not guaranteed.)
See all Mitutoyo Bore Gages for Blind Holes, Series 511
Reviews
There are no reviews yet.